RFspace NetSDR Bedienungsanleitung PDF herunterladen (Seite 6)

1.4. NetSDR USB Debug/Development Port

The NetSDR has a USB port that can be used as an aid in developing/debugging interfaces to the NetSDR. It

instantiates as a simple serial COM port and then will output the NetSDR control/status message traffic in ASCII text to

any terminal program.

For the Windows platform, the SpectraVue software installation includes a USB driver for the NetSDR debug port.

It is installed at C:\Program Files\SpectraVue\NetSDRUSBdriver by default.

Other platforms should recognize the COM port automatically.

Here is some example output of a typical session. The arrow at the far left indicates the direction the message is

coming from.

Socket0 Init

Listening0

Connected0

CItem Request Msg 1 CI_GENERAL_INTERFACE_NAME = NetSDR

< Length=11 [B] [0] [1] [0] [4E] [65] [74] [53] [44] [52] [0]

CItem Request Msg 2 CI_GENERAL_INTERFACE_SERIALNUM = KV000006

< Length=13 [D] [0] [2] [0] [4B] [56] [30] [30] [30] [30] [30] [36] [0]

CItem Request Msg 4 [4] [0] [0]

< Length=7 [7] [0] [4] [0] [0] [67] [0]

CItem Request Msg 4 [4] [0] [1]

< Length=7 [7] [0] [4] [0] [1] [4] [0]

CI_RX_FREQUENCY NCO 7150000 [0] [0] [B0] [19] [6D] [0] [0]

< Length=10 [A] [0] [20] [0] [0] [B0] [19] [6D] [0] [0]

CI_RX_RF_FILTER 0[0] [44] [0] [0] [0]

< Length=6 [6] [0] [44] [0] [0] [0]

CI_RX_AD_MODES 3 [0] [8A] [0] [0] [3]

< Length=6 [6] [0] [8A] [0] [0] [3]

CI_RX_OUT_SAMPLE_RATE 500000] [0] [20] [A1] [7] [0]

< Length=9 [9] [0] [B8] [0] [0] [20] [A1] [7] [0]

CI_RX_STATE START ComplexMode Contig 24bit ] [0]

< Length=8 [8] [0] [18] [0] [80] [2] [80] [0]

CI_RX_RF_GAIN 0] [0] [38] [0] [0] [0]

< Length=6 [6] [0] [38] [0] [0] [0]

UDP1 Opening

UDP1 Open

CI_RX_STATE STOP [0] [18] [0] [80] [1] [80] [0]

< Length=8 [8] [0] [18] [0] [80] [1] [80] [0]

UDP1 Close

Rev. 1.03 2011-11-01

1 2 3 4 5 6 7 8 9 10 11 ... 31 32

Keine Kommentare

RFspace NetSDR Bedienungsanleitung Seite 6